Effects on the Thermo-Mechanical and Interfacial Performance of Newly Developed PI-Sized Carbon Fiber-Polyether Ether Ketone Composites: Experiments and Molecular Dynamics Simulations.

In this study, polyether ether ketone (PEEK) composites reinforced with newly developed water-dispersible polyimide (PI)-sized carbon fibers (CFs) were developed to enhance the effects of the interfacial interaction between PI-sized CFs and a PEEK polymer on their thermo-mechanical properties. The PI sizing layers on these CFs may be induced to interact vigorously with the p-phenylene groups of PEEK polymer chains because of increased electron affinity. Therefore, these PI-sized CFs are effective for improving the interfacial adhesion of PEEK composites. PEEK composites were reinforced with C-CFs, de-CFs, and PI-sized CFs. The PI-sized CFs were prepared by spin-coating a water-dispersible PAS suspension onto the de-CFs, followed by heat treatment for imidization. The composites were cured using a compression molding machine at a constant temperature and pressure. Atomic force and scanning electron microscopy observations of the structures and morphologies of the carbon fiber surfaces verified the improvement of their thermo-mechanical properties. Molecular dynamics simulations were used to investigate the effects of PI sizing agents on the stronger interfacial interaction energy between the PI-sized CFs and the PEEK polymer. These results suggest that optimal amounts of PI sizing agents increased the interfacial properties between the CFs and the PEEK polymer.

Structural Effect of Polyimide Precursors on Highly Thermally Conductive Graphite Films.

In this study, polyimide (PI) with high carbonization yield was used as a precursor to prepare graphite films with high thermal conductivity. The crystallinity, grain size, and thermal conductivity of the graphite films were characterized and found to vary according to the chemical structure of the PI precursor. Aromatic PIs containing ortho-substituted hydroxyl groups in the PI main chain (DHB-BPDA) were synthesized by the polycondensation reaction of 3,3'-dihydroxybenzidine (DHB) and 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA). The DHB-BPDA is converted to a polybenzoxazole (PBO) structure through thermolysis reaction during carbonization. The PBO containing a benzene ring and a heterocycle group can provide a strong main chain and high thermal stability due to its resonant structure. The graphite film prepared from DHB-BPDA exhibited a large grain size (63.727 nm) and a high thermal conductivity of 916 W/(mK).

Analysis of the effect of organic solvent-sheet interfacial interaction on the exfoliation of sulfur-doped reduced graphene oxide sheets in a solvent system using molecular dynamics simulations.

In this study, the effect of interfacial interaction between solvent and sheets on the exfoliation of sulfur-doped reduced graphene oxide (SrGO) sheets was studied, using molecular dynamics simulations. Four organic solvents of toluene, tetrahydrofuran, N-methyl-2-pyrrolidone, and sulfolane, were used in this simulation. An insertion simulation considering the size effect of insertion molecules was used to determine the insertion efficiency of the solvent molecules. The insertion efficiency of toluene was the best among the four solvents due to the influence of the effective thickness of the solvent. An exfoliation simulation considering electrostatic interaction was conducted to evaluate the exfoliation efficiency of the SrGO sheets. Unlike the insertion efficiency case, the sulfolane was found to have the best exfoliation efficiency among the four solvents, due to the strong electrostatic repulsion and weak attractive energy between the SrGO sheets. The exfoliation efficiency of the SrGO sheets was improved by increasing the sulfur content and the ratio of the thiol type to the total number of sulfur-doped groups. These results reveal that decreasing the attractive energy and increasing the electrostatic repulsion between the solvent and SrGO sheets are a useful way to improve the exfoliation efficiency of SrGO sheets.